I'm always keeping an eye on 3d printer developments, innovations and direction, as things continue to evolve at some pace. Digesting these influences, I've regularly found myself subjectively noting the 'desirable' and 'best' features of the changing printer vista, with one eye, as always, on building my next printer.
A design is always given focus with some constraints, and for my "next printer" I imposed some goals that formed the general basis of the prototyping and experimentation that followed, for some time now. Key enhancement objectives included such goals as faster print speeds without loss of print quality, dual extrusion, moderately larger print volume, but minimum increase in outer printer dimensions. Secondary goals might be a flexible carriage system to allow for easy print head swap-outs for greater flexibility.
The choice of movement system and filament feed mechanism was left open in the early research. Also, I wanted to explore and experience bowden vs direct drive, 3mm vs 1.75 and the pros and cons of these now common machine choice variables. My new printer would give greater opportunity for testing and learning, reconfiguration for experimentation.
The attractions of CoreXY has stood out for some years, and has enjoyed much adoption in both experimental machines and commercial printers of late (FABtotum, Airwol3D Axiom, SmartrapCore). I quickly settled on this as key design feature and pushed on with some basic pland.
Armed with Sketchup, my trusty Mendel90 and access to a local Fab Lab laser cutter I was quickly able to stand-up a basic core-xy chassis. For a fast and relatively accurate movement system I also took inspiration for RichRap's use of Spectra line as in his Sli3RD Printer, and even Nicholas Seward's CoreXZ printer. The following fishing line CoreXY "plotter" was put together (Photo below.).
Using fishing-line allowed compact and flexible "belt" paths. By routing the line over small groove pulleys it was possible to position the motors below the x/y plane resulting in space saving and more compact external dimensions. (Illustrated in photos below)
Access to a laser cutter was transformative in terms of flexibility of chassis design, manufacture and build speed. It allowed me to iterate quickly, and a very low cost. I worked in Shetchup, exporting to SVG via a plugin for laser cutting comparability.
The prototype printer, pictured below (actually just a plotter at this stage), made many trips to the Fab Lab - Thursday evening sessions over the Winter, for peer review and valued feedback. It was during one of these visits that it earned it nick name, the "IvorBot", which has stuck!
Testing with the fishing-line core-xy chassis ran it's course. It was functional and with the addition of an extruder might even have done some printing, but it didn't have the robustness I was striving for. Also, my choice of cheap grove bearings was a mistake and they were grinning and failing as I'd push the speed and tension on the fishing-line.
The next major revision of the design was a move to belt drive, and brass pulleys. I designed and printed a whole new set of motor mounts, corner brackets and x-carriage ends. I chose 9mm GT2 belt, matching brass pulleys with double inserted bearings, LMS8UU linear bearings. I ran a "stacked" cord-xy belt path so there was no cross-over in the design. I felt the wider belt and pulleys wouldn't lend itself to the cross-over belt path that typified some core-xy layouts.
Above, "IvorBot" current revision. It prints reasonably, but there were many changes to get it to this stage as you might appreciate. I recently got it tuned up for dual colour printing, which was a new personal mile-stone, and gave me the incentive to resume some bloggin. There's lots more detail to share, and much planning going into changing and refining my design, but for now I'll sign-off and get this much published.
As always, comments and questions welcome!